1、 Product Introduction:< The constant temperature and humidity testing machine, also known as the environmental testing machine, tests the heat resistance, cold resistance, dry resistance, and moisture resistance of various materials. Suitable for quality testing of electronic, electrical, communication, instrument, vehicle, plastic products, metal, food, chemical, building materials, medical, aerospace and other products< 2. Product Features:

High quality appearance, the body adopts a circular arc shape, the surface is treated with matte stripes, and a flat non reactive handle is used, which is easy to operate, safe and reliable.

The rectangular laminated glass observation window can be used for observing the test sample during the experiment. The window is equipped with an anti sweat electric heater device to prevent water vapor condensation and droplets, and a high brightness PL fluorescent lamp to maintain illumination inside the box.

The double-layer isolation and airtight tightness of the box door can effectively isolate internal temperature leakage.

Equipped with an external water supply system, it is convenient to supplement the humidification tank water supply and automatically recycle it for use.

The compressor circulation system adopts the French "; Taikang "; The brand can effectively remove lubricating oil between the condenser and capillary tubes, and the entire series uses environmentally friendly refrigerants (R23, R404, R507).

The controller adopts an imported LCD display screen, which can simultaneously display measured values, set values, and time. The controller has multi-stage program editing and can be used for fast (OUICK) or slope (SLOP) control of temperature and humidity.

The built-in mobile pulley is easy to move and place, and has strong positioning screws to fix the position.

III. Execution Standards and Test Methods:

1 GB11158  Technical conditions for high temperature test chamber

2 GB10589-89  Technical conditions for low-temperature test chamber

3 GB10592-89  Technical conditions for High and low temperature test chambers

4 GB/T10586-89  Technical conditions for wet heat test chamber

5 GB/T2423.1-2001  low temperature test chamber test method

6 GB/T2423.2-2001  High temperature test chamber test method

7. GB/T2423.3-93 Damp Heat Test Chamber Test Method

8 GB/T2423.4-93  Alternating damp heat test method

9. GB/T2423.22-2001 Temperature change test method

10 IEC60068-2-1.1990  Low temperature test chamber test method

11 IEC60068-2-2.1974  High temperature test chamber test method

12 GJB150.3  High temperature test

13 GJB150.4  Low temperature test

14 GJB150.9  Damp heat test

4、 Product; Specification and Model:

Model WS-KS-80 (A~G) WS-KS-150 (A~G) WS-KS-225 (A~G) WS-KS-408 (A~G) WS-KS-608

(A~G) WS-KS-800 (A~G) WS-KS-1000 (A~G)

Internal dimensions (cm) 40x50x40 50x60x50 50x75x60 60x85x80 80x95x80 100x100x80 100x100x100

External dimensions (cm) 90x136x94 100x146x104 100x161x117 110x171x137 130x181x137 150x186x137 150x186x157

Temperature range -70 ℃~+100 ℃ (150 ℃)

(A:+25℃ B:0℃ C:- 20℃ D:- 40℃ E:- 50℃ F:- 60℃ G:- 70℃)

Humidity range 20%~98% R.H. (10%~98% R.H/5%~98% R.H is a special selection condition)

Temperature and humidity analysis accuracy/uniformity ± 0.1 ℃; ±0.1%R.H./±1.0℃； ±3.0%R.H.

Temperature and humidity control accuracy/fluctuation ± 1.0 ℃; ±2.0%R.H./±0.5℃； ±2.0%R.H.

The average heating/cooling time is 12.0 ℃/minute; Average 5-10 ℃/min

The internal and external materials of the machine are all SUS 304 # stainless steel plate with matte treatment, and the inner box is made of stainless steel

Thermal insulation material High temperature resistant and high-density vinyl chloride acetate foam insulation material

Cooling system air, water-cooled/two-stage compressor

Protective device without fuse switch, compressor overload protection switch, refrigerant high and low voltage protection switch, over humidity and over temperature protection switch, fuse, fault warning system

Accessories recorder (optional), viewing window, 50mm test hole, PL box light, partition, dry wet ball gauze

Choose between the Korean "TEMI" or Japanese "OYO" brand controllers

Compressor brand "Taikang" from France

Power supply 3 φ 380VAC ± 10% 50/60Hz